Specialist Supplier Of Electronic Components, Semiconductors & Rugged Electronic Systems.

Allyanz Electronics, Semiconductors, Integrated Modules, Displays. Manufacturers Representative & Distributor Australia, NZ & South East Asia. Tel: +61.3.9759 5949

ISSI Now Offering UFS 2.1/2.2 - Universal Flash Storage
ISSI offers a wide portfolio of LPDDR4 & LPDDR4X DRAM ranging from 2Gb through 64Gb

- Low-voltage supplies: 1.8V, 1.1V
- I/O at 1.1V (LPDDR4) or 0.6V (LPDDR4X)
- Clock Frequency Range : 10MHz to 2133MHz
- Data rates from : 20Mbps to 4266 Mbps per I/O
16n Pre-fetch DDR Architecture
- Multiplexed, double data rate, command/address inputs
- ZQ Calibration
- Mobile features for lower power
- Long-term, reliable support  

- Low-voltage supplies: 1.8V, 1.1V
- I/O at 1.1V (LPDDR4) or 0.6V (LPDDR4X)
- Clock Frequency Range : 10MHz to 2133MHz
- Data rates from : 20Mbps to 4266 Mbps per I/O
16n Pre-fetch DDR Architecture
- Multiplexed, double data rate, command/address inputs
- ZQ Calibration
- Mobile features for lower power
- Long-term, reliable support  

- Low-voltage supplies: 1.8V, 1.1V
- I/O at 1.1V (LPDDR4) or 0.6V (LPDDR4X)
- Clock Frequency Range : 10MHz to 2133MHz
- Data rates from : 20Mbps to 4266 Mbps per I/O
16n Pre-fetch DDR Architecture
- Multiplexed, double data rate, command/address inputs
- ZQ Calibration
- Mobile features for lower power
- Long-term, reliable support  

LVDS Serial Interface
ISSI Now Offering UFS 2.1/2.2 - Universal Flash Storage
previous arrow
next arrow
Shadow

Battery Charger ICs from Summit Microelectronics

Published 06/08/2009

wima_super_cap_modules Summit Microelectronics has introduced two more members of its third-generation programmable battery charger integrated circuit (IC) family.

The SMB136 and SMB137B employ Current Path technology, providing dual input source (USB or AC/DC) with arbitration, dual output for system and battery and system operation with a dead or missing battery.

Both products support all battery charging standards:

  • USB 2.0 Specification,
  • USB On-The-Go Supplement,
  • USB Battery Charging Specification 1.0,
  • IEEE1725 Standard,
  • Chinese USB Charging Specification, and others.

Furthermore, the SMB136 and SMB137B are the only battery charger ICs with CurrentPath to detect the input source type (USB host/hub, AC/DC, etc.).

For more information please contact us.

Return to What’s New Page

WIMA New Super Cap Modules

Published 06/08/2009

WIMA New Super Cap Modules

Double-Layer Capacitors from WIMA are now also available as cascaded and balanced modules with capacitances up to 200 F or with nominal voltages up to 28 VDC.

WIMA SuperCaps have a service life beyond 10 years and can easily sustain more than 500,000 charge/discharge cycles, when operated within specification.

The efficiency is far higher than 90%. Compared to other energy storage solutions, WIMA SuperCaps stand out for maintenance-free operation, high life expectancy and relatively low weight. This makes them very well suited to applications in isolated systems e.g. in inaccessible areas.

For more information please contact us.

Return to What’s New Page

WIMA New Super Caps

Published 14/07/2009

The new WIMA SuperCaps “C” series is currently available in capacitance’s of 110, 200, 600 and 120 Farad (prototypes up to 10000 F), which completes the existing range of WIMA Double-Layer Capacitors with rectangular casing and beyond.

The WIMA SuperCap C is outstandingly suitable for energy storage applications where high loads need to be discharged and/or charged in a very short time cycle.

To achieve specific operating voltages needed by the application, we offer the flexibility to cascade SuperCaps into Modules.

Unlike conventional energy storage in a battery, the charged energy can be retrieved safely from a SuperCap module without risk of a sudden voltage breakdown.

For more information please contact us.

Return to What’s New Page

Logic Devices sampling DDR3 IMOD

Published 04/07/2009

LOGIC Devices, a developer of high performance, low power integrated circuits; has announced plans to start sampling its’ DDR3 IMOD products in Q2’09. LOGIC Devices first DDR3 device is a 4.0 GB, 64 M x 64, DDR3-1333 DRAM available in Industrial (-40C to +85C), Extended (-40C to +105C) and Mil temperature (-55C to +125C) grades, and packaged in a 16mm x 22mm, thermally enhanced, 271ball -1.00mm pitch, PBGA. These devices provide a 40% space savings over the use of (4) 96 ball, 9.00+mm x 16.00+mm BGAs as well as a 30% decrease in total I/O, all while providing major improvements in heat dissipation via use of proprietary packaging IP.

For more information please contact us.

Return to What’s New Page

1 … 15 16 17 18

What’s New

Allyanz Supplier Partners

Achronix
Aydin Displays
EM Microelectronics
Fortasa Memory Systems
Gaia Converter
IEE Inc.
Innovasic Semiconductor
ISSI
Lattice Semiconductor Corp.
LOGIC Devices
Macronix
NSI
Ritec
Summit Microelectronics
Swissbit
TLSI
Wakefield

Archives