What's New - Page 10 of 18 - Specialist Supplier Of Electronic Components, Semiconductors & Rugged Electronic Systems.

ISSI Now Offering UFS 2.1/2.2 - Universal Flash Storage

ISSI offers a wide portfolio of LPDDR4 & LPDDR4X DRAM ranging from 2Gb through 64Gb

- Low-voltage supplies: 1.8V, 1.1V
- I/O at 1.1V (LPDDR4) or 0.6V (LPDDR4X)
- Clock Frequency Range : 10MHz to 2133MHz
- Data rates from : 20Mbps to 4266 Mbps per I/O
16n Pre-fetch DDR Architecture
- Multiplexed, double data rate, command/address inputs
- ZQ Calibration
- Mobile features for lower power
- Long-term, reliable support

ISSI Now Offering UFS 2.1/2.2 - Universal Flash Storage

Lattice Expands Low Power, Small FPGA Portfolio with High I/O Density and Secure Device Options

Doubles its general purpose, secure control device options with new Certus-NX and MachXO5-NX FPGA devices.

Lattice Semiconductor, the low power programmable leader, is expanding its small FPGA portfolio with new, high I/O density options in the Lattice Certus™-NX FPGA and Lattice MachXO5™-NX FPGA device families.

Lattice Expands Low Power, Small FPGA Portfolio with High I/O Density and Secure Device Options

ISSI Now Offering UFS 2.1/2.2 - Universal Flash Storage

ISSI is currently sampling 64 GB, 128 GB & 256 GB devices, supporting UFS 2.1, and UFS 2.2. ISSI’s UFS product family provides the ideal embedded storage solution for the Automotive, Industrial, Medical, Networking, and Consumer applications, which require high performance, endurance, and low power across a wide range of operating temperatures, with long-term support.

ISSI sampling AEC-Q100 Qualified SLC NAND Flash for Automotive & Industrial Applications

ISSI’s SLC NAND Flash devices support a wide operating temperature range of -40C to 105C, making them ideal for next generation automotive, industrial and Internet of Things (IoT) applications. Both the SPI NAND and parallel NAND Flash devices are AEC-Q100 qualified meeting the stringent automotive qualification requirements. ISSI offers parallel SLC NAND in 1Gb, 2Gb, 4Gb & 8Gb densities.

ISSI sampling AEC-Q100 Qualified SLC NAND Flash for Automotive & Industrial Applications

Swissbit Presents Industrial eMMC EM-30 - copy

Swissbit Presents Industrial eMMC EM-30

Swissbit, a leading manufacturer of flash memory solutions, presents its latest technology for demanding industrial, medical & automotive markets: eMMC memory, EM-30.

Swissbit’s EM-30 eMMC offers high performance with up to 300 MB/s for reading and 230 MB/s for writing.

Swissbit industrial grade 3D NAND e-MMC 5.1 bga

Swissbit Presents Industrial eMMC EM-30 - copy

ISSI Introduces 512Mb SPI NOR Flash for Automotive & Industrial Markets - copy

ISSI Introduces 512Mb SPI NOR Flash for Automotive & Industrial Markets

Integrated Silicon Solution, Inc. (ISSI), a leader in advanced memory and analog solutions, has begun sampling production units of automotive grade 512Mb Serial (SPI) NOR Flash.

ISSI Introduces 512Mb SPI NOR Flash for Automotive & Industrial Markets - copy

Achronix shipping new Speedster22i HD

Published 11/09/2013

lattice single chip non volatile latticexp2 fpgas

Speedster^(R)22i HD devices from Achronix are the world’s highest-density FPGAs, offering up to 1.7 million effective LUTs and 138 megabits of embedded RAM. Built on Intel’s 22nm 3-D Tri-Gate FinFET process, Speedster22i HD devices are SRAM-based and fully-reconfigurable, and offer a familiar fabric architecture made up of synchronous look-up tables (LUTs), flops, muxes, carry chains, memories and multipliers.

achronix-speedster-family-data-table

The I/O frame contains dedicated hard IP, configurable I/Os, SerDes, clock generator blocks with phase lock loops (PLLs), and the device configuration logic.

Speedster22i FPGAs contain up to sixty four (64) lanes of 12.75 Gbps SerDes, up to sixteen (16) lanes of 28 Gbps SerDes and up to 996 high-speed general purpose I/Os.

Additional dedicated hard IP includes up to six (6) DDR3 PHY and controllers, up to forty eight (48) 10 gigabit Ethernet controllers, or up to twelve (12) 40 gigabit Ethernet controllers or up to four (4) 100 gigabit Ethernet controllers. There are also are up to four (4) Interlaken controllers and two (2) PCI Express controllers, all available as embedded hard IP which use none of the reconfigurable logic resources and achieve maximum performance without the need for timing closure or optimization.

Please contact Allyanz today to discuss how you can start designing with Speedster22i FPGAs.

Return to What’s New Page

Micrel Introduces 85V Half Bridge MOSFET Drivers

Published 17/08/2013

Micrel Introduces 85V Half Bridge MOSFET Drivers with Integrated Bootstrap Diode, Widest Programmable Gate Drive Range

Solution Offers Up To 40 Percent Longer Operating Time Over Existing Devices for Battery Powered Applications

Micrel Inc., industry leader in high-performance Linear and Power solutions, LAN and timing and communications solutions, has released the new MIC4604, a 85V Half Bridge MOSFET driver that features an integrated 85V Bootstrap diode and one of the widest programmable gate drive ranges (5.5V to 16V) in the industry.

These features make the MIC4604 an ideal solution for the industry’s most demanding battery operated motor applications including Communications (HF) Radios, Power tools and Power DC/AC inverters.

Please contact Allyanz today for more details or evaluation samples of the MIC4604.

Return to What’s New Page

Micrel Announces New Enhanced 2-Port Ethernet Controller

Published 15/08/2013

Micrel Announces New Enhanced 2-Port Ethernet Controller with 8/16-bit host interface – KSZ8852HLEWC

Micrel Enhanced 2-Port Ethernet Controller

The KSZ8852 family from Micrel is an enhanced version of the current KSZ8842 Ethernet Controller family providing the following advantages:

Lower power – total <300mW typical
EEE (Energy Efficient Ethernet) support
On-Chip Termination Resistors
Smaller package – 64-pin LQFP (10mm x 10mm)
Increased traffic throughput
Improved ESD >4kV
Extended temperature range -40^oC to +105^oC

Please contact Allyanz today to discuss further details, or organise samples for the new KSZ8842 from Micrel.

Return to What’s New Page

Versatile New DC/DC Buck HBLED Driver from ISSI: IS31LT3360

Published 15/08/2013

The IS31LT3360 is a simple and a flexible LED driver being used in a wide range of applications that include alarms, pool lighting and flashlights.

This is a versatile new LED driver from ISSI which requires a very low BOM count making it simple to integrate into a variety of applications.

A continuous mode inductive driver available in a space saving SOT89-5 package, the IS31LT3360 integrates the output FET switch and the current sense circuit; requiring only a sense resistor and an external inductor to set the LED output current (up to 1200mA).

The IS31LT3360 is a DC/DC buck converter operating at a 1Mhz switching frequency to efficiently (up to 98%) drive one or more series connected LEDs from a voltage source higher than the LED voltage.

Please contact Allyanz today for more details or evaluation samples of the IS31LT3360.

Return to What’s New Page

Swissbit now shipping INDUSTRIAL 2GB-8GB DDR3L SO-DIMMs

Published 15/08/2013

Swissbit has released new members of its INDUSTRIAL family of DDR3 SODIMMs compatible with the JEDEC DDR3L standard running at 1.35V. DDR3L will allow an up to 15% reduction in power consumption over DDR3.

With the introduction of 3x and 2x nm DRAM technology, the modules are able to run at lower external supply voltage than the standard 1.50V. Foreseeing this evolution, JEDEC as the standardization group for DRAM components has developed a new standard for 1.35V operation called DDR3L (L standing for low voltage). Systems supporting this feature benefit from a reduced supply voltage and decreased power consumption. This lowers the self heating, and thermal margins while increasing system reliability.

Swissbit now offers DDR3L SO-DIMMs and DDR3L SO-UDIMMs (72b SO-DIMMs) with 2GB to 8GB densities, and speed grades up to DDR3L-1600.

The modules are available in both commercial 0^oC to +85^oC (T_Case) and industrial -40^oC to +95^oC (T_Case) temperature grades and with ECC (error correction support) on demand.

Please contact Allyanz today for more details or evaluation samples of the Swissbit DDR3L SO-DIMMs.

Return to What’s New Page

Specialist Supplier Of Electronic Components, Semiconductors & Rugged Electronic Systems.

Allyanz Electronics, Semiconductors, Integrated Modules, Displays. Manufacturers Representative & Distributor Australia, NZ & South East Asia. Tel: +61.3.9759 5949

Achronix shipping new Speedster22i HD

Micrel Introduces 85V Half Bridge MOSFET Drivers

Micrel Announces New Enhanced 2-Port Ethernet Controller

Versatile New DC/DC Buck HBLED Driver from ISSI: IS31LT3360

Swissbit now shipping INDUSTRIAL 2GB-8GB DDR3L SO-DIMMs

What’s New

Allyanz Supplier Partners

Archives

Allyanz Pty Ltd

Allyanz Electronics

Allyanz Supplier Partners

Navigation